Cable trailer 10 000 kg - 80 km/h
Description
Cable trailer
Technical data
| Model | 72500 |
|---|---|
| Load at 80 km/h | approximately 10 000 kg |
| Load | |
| 80 km/h | approximately 10 000 kg |
| 25 km/h | approximately 13 000 kg |
| Empty weight | approximately 3 500 kg |
| Permissible total weight | approximately 13 500 kg |
| Max. diameter of drum | approximately 3 600 mm |
| Min. diameter of drum | approximately 3 000 mm |
| Max. width of drum | approximately 1 650 mm |
| Clear loading width | approximately 1 750 mm |
| Overall length | approximately 6 000 mm |
| Overall width | approximately 2 550 mm |
| Overall height | approximately 2 450 mm |
| Tyre size (4x) | 11 R 22.5 148 K |
| Tow eye | 50 mm (DIN-type ring) |
| Height of tow eye in horizontal position | approximately 1 000 mm |
| Rear lights | 24 V D.C. |
| Paint finish | RAL 2000, orange |
Product description
Construction: U-shaped steel structure with a hitch in the centre, height-adjustable hitch with a tow eye of internal diameter 50 mm, support wheel with hard rubber tyre.
Axle: 4 axle ends in a tandem arrangement. Each axle is equipped with swing-arm suspension with an air spring.
Brake system: Dual-line compressed-air brake system with ALB and ABS.
Loading equipment: 2 hydraulic jacks lift the cable drum into the transport position. The hydraulic unit is driven by a petrol engine. Loading and unloading of the drum are controlled by two independently operating hydraulic valves. This allows the loading cylinder to be operated separately.
Cable drum drive: The trailer is also equipped with a hydraulic drum drive. It is driven by the same hydraulic unit that is used for loading. A drive shaft fitted with two rubber rollers is pressed against the rim of the cable drum and works in both directions, allowing the cable to be wound onto and off the drum. The rotational speed is infinitely variable.
Electrical system: Two 3-section rear lights, 24 V DC, in accordance with German road traffic regulations (StVZO), 15-pin connecting cable.
Finish: All steel parts are sandblasted and phosphated, then coated with high-quality paint in RAL 2000 orange.
Accessories (included as standard)
- 1 steel drum axle with an outer diameter of 95 mm with 2 flanges
- 1 spanner
- 2 wedges
- 1 operating manual
| Order number | 72500 VAR. 9 – 14 – 19 - 80 |
|---|
