Comressors CompAir C42 Volume flow 4.2 m3/min

CompAir C42 screw compressor
Capacity 4.2 m/min

Pressure ranges from 7 bar

Engine power 35.0 kW

Weight 750 kg

Yanmar 4TNV88C petrol engine with EU V exhaust stage
Rated power [kW]: 35
Starter: manual
Fixed hitch without brake SU2
Tank capacity 60 l
Dimensions (L x W x H) [mm]: 3590 x 1490 x 1326
Weight [kg]: 750

Applications

Extraction and breaking tools
Blowing work
Drilling
Soil loosening (compressed air lances)
Pile driving
Earth rockets
Paint spraying
Sandblasting
Combination of compressed air and generator
Thanks to the particulate filter, the extremely smooth-running, water-cooled 4-cylinder Yanmar diesel engines from this highly successful CompAir series comply with the EU Stage V emission standard.

These compressors are ideal for urban use, where the highest demands are placed on low exhaust emissions and noise. The low operating weight of less than 750 kg or 810 kg (without height adjustment without brakes or with brakes) is predestined for use in rental parks.

These compact, lightweight compressors are optionally available with an integrated generator and/or aftercooler, as well as with various chassis. Some types are equipped with FPM (Flexible Power Management).

Features Advantages
Yanmar 4TNV88C with EU V emission standard Future-proof investment thanks to the most modern and economical technology
Highly efficient compressor stage of our own German production Low power consumption, low energy and fuel requirements
Mobile 5 program: up to 5 years warranty on the package except engine Safety of operation with guarantee
Less engine load during start-up without load Extends service life due to low engine load during start-up and ensures that operating temperature is reached with low compressor load
Galvanized, electrostatically powder-coated lining plates as standard Economical and quick replacement in the event of damage. Best corrosion protection
Hinged hood with two robust gas springs Good accessibility for maintenance
Robust plastic protection Protects the control panel and traffic safety components
Optional compressed air filtration Technically oil-free according to ZTVING Part 3, paragraph 4
Standard fuel pre-filter with water separator Long engine life thanks to effective separation of water and dirt particles
Modern air filters for engine and compressor with safety element Long filter life, long maintenance intervals and high operational reliability
FPM – Flexible Power Management: Volume and pressure control The flow is regulated depending on the set pressure, so that a wide range of applications can be covered with one compressor. Oil filter is screwed to the compressor block Allows quick and easy maintenance
Main electrical switch inside the compressor housing Protection against abuse
Central crane eye Easy to carry and lift by crane or helicopter
Standard oil temperature control valve Reduces freezing of connected tools in low temperatures
Transparent fuel tank Designed for single-shift operation at full load. Fill level and contamination can be easily detected
Use in ambient temperatures from -10 to +45 °C Wide range of applications
Use:
• Demolition hammers and pneumatic tools

• Fiber optic blowing

• Small diameter moles