Pneumatic mole- 130 mm SET with compressor COMP AIR C42

Machine Purpose

• Performing horizontal ramming (soil displacement) with a diameter of 130 mm

• Performing ramming with diameters 160 mm, 180 mm, 195 mm, 219 mm using expanders

• Pulling PE/PVC pipes directly behind the machine, diameters 90–125 mm

• Pulling PE/PVC pipes using additional accessories, diameters 140 mm, 160 mm, 180 mm, 200 mm

• Driving steel pipes using cones up to a diameter of 323 mm

Technical Specifications

• Diameter: 130 mm

• Length: 1815 mm

• Weight: 115 kg

• Air consumption: from 2.4 m³/min (recommended compressor capacity: 3.6 m³/min)

• Operating pressure: 7 atm

• Impact energy: 430 J

• Impact frequency: 6 Hz

Set Includes

• Pneumatic piercing tool (soil displacement hammer) type “mole” Ø130 mm

• Supply and control hose, 20 m

• Lubricator with control valves

• Set of tools for equipment change

• EkoMAX oil – 5 L

• KorMAX oil – 1 L

• LOCTITE 55 sealing thread

Product Description

The Z130 is the longest-produced machine – it is where everything began. Over the years, it has been continuously improved and refined into the current model. The latest modernization (in production since 2004) has retained all the advantages of its predecessor, such as high accuracy and low operating costs, while achieving higher impact energy and exceptional durability, thanks to a completely new head-to-cylinder connection and a redesigned striker.

The Z130 is the most frequently purchased machine in Poland due to its versatility. Its wide range of applications allows both:

• independent soil displacement,

• displacement with simultaneous installation of PE/PVC pipes.

With additional equipment, boreholes can be expanded up to 219 mm and pipes with diameters 160–200 mm can be installed.

Using expanders is recommended when the machine is mainly intended for installing pipes up to 130 mm, while larger diameters (160–200 mm) are required only occasionally.

Optional Equipment

• Sleeve Ø90–110 mm with equipment for pulling PE/PVC pipes

• Sleeve Ø125 mm with equipment for pulling PE/PVC pipes

• Bore expansion set with expanders Ø160, Ø180, Ø195, Ø219 mm and equipment for pulling PE/PVC pipes up to Ø200 mm

• Steel pipe driving set: Ø133, Ø159, Ø219, Ø273, Ø323 mm

• Spoil removal plate: Ø133, Ø159, Ø219, Ø273, Ø323 mm

• Optical alignment set (scope + rod) 3 m

• Optical alignment set (scope + rod) 2 m

Additional items:

• EkoMax oil – 5 L / 20 L

• Lightweight compressor–lubricator hose 10 m / 20 m

• Cutting head for manual pipe pulling Ø25–55 mm (with or without supply-control hose)

CompAir Screw Compressor C42

Technical Data

• Capacity: 4.2 m³/min

• Pressure range: from 7 bar

• Engine power: 35.0 kW

• Weight: 750 kg

Engine

• Yanmar 4TNV88C, Stage V (EU emissions)

• Rated power: 35 kW

• Manual starter

• Fixed tow bar without brake (SU2)

• Fuel tank capacity: 60 L

• Dimensions (L × W × H): 3590 × 1490 × 1326 mm

• Weight: 750 kg

Applications

• Extraction and breaking tools

• Blowing and cleaning work

• Drilling

• Soil loosening (compressed-air lances)

• Pile driving

• Ground piercing tools (soil rockets)

• Paint spraying

• Sandblasting

• Combined compressed air and generator applications

Thanks to the diesel particulate filter, the smooth-running, water-cooled 4-cylinder Yanmar engines comply with EU Stage V emission standards.

These compressors are ideal for urban use, where low emissions and noise are required. Their low operating weight (below 750 kg or 810 kg depending on configuration) makes them particularly suitable for rental fleets.

These compact and lightweight compressors are optionally available with:

• integrated generator,

• aftercooler,

• various chassis options.

Selected models are equipped with FPM (Flexible Power Management).

Applications:

• Demolition hammers and pneumatic tools

• Blowing in fiber optic cables

• Small-diameter mole machines