Pneumatic mole - 160 mm

Technical data

Product description

The machine is designed for pulling in plastic pipes with diameters of 110 mm - 160 mm in the first operation. It can be used to pull in the increasingly popular 125 mm pipes with a socket or coupler connecting the individual segments. Using expanders, pipes with a diameter of 180 and 200 mm can be pulled in. The Z160 is also excellent for ramming steel pipes with diameters up to 406 mm.

Key features

• Air consumption from 3.5 m³/min (recommended compressor capacity 4.5 m³/min)

Machine application

Performing jacking with a diameter of 160 mm

• Performing jacking with diameters of 195 mm and 219 mm using expanders
• Pulling in PE / PVC pipes with diameters of 110 mm,140 mm and 160 mm directly behind the machine
• Pulling in PE / PVC pipes with diameters of 180 mm - 200 mm using additional accessories
• Ramming steel pipes up to a diameter of 406 mm using cones

The set includes

jacking machine with a diameter of 160 mm,

Available options

Sleeve for pulling in PE/PVC pipes Ø110 mm -Ø125 mm, 140 mm, Ø160 mm

Auxiliary accessories for pulling in PE/PVC pipes

• Towing end for work with an expander
• Towing screw-in insert for pulling in pipes
• PE/PVC with expanders
• Transition line for pulling with a towing screw-in insert
• Cone for ramming steel pipes Ø90 - Ø190,
• Ø180 - Ø240, Ø230 - Ø290, Ø280 - Ø340, Ø356 - Ø406
• Blow-out plates for removing spoil from steel pipes, with compressor-oiler hose and locking pins, plus blow-out plugs
• Optical set (sighting scope + pole) 3 m
• Optical set (sighting scope + pole) 2 m
• EkoMax oil 5 litres
• EkoMax oil 20 litres
• Compressor – oiler hose, light, 10 m
• Compressor – oiler hose, light, 20 m
• Cutting tip for manual pulling-in of pipes from Ø 25 mm to Ø 55 mm
• Cutting tip for manual pulling-in of pipes from Ø 25 mm to Ø 55 mm without the supply and control hose