Pneumatic mole - 65 mm short version SET

Technical data

Product description

The Z065 is a very easy-to-use jacking machine for installing small-diameter pipes. The weight of the mole of 14.7 kg and the very low air consumption make it a very popular model. With it you can make a service connection starting from a basement and ending e.g. in a manhole, i.e. completely trenchless, without disturbing gardens, lawns, etc. During jacking, pipes with diameters of 50 mm or 63 mm can be pulled in at the same time. It is used mainly for service connections to individual buildings and in trenchless work on electrical and telecommunication networks.

Application

performing stand-alone jacking,

• pulling in PE, PVC pipes with a diameter of 50 mm and 63 mm during jacking,
• pulling in PE, PVC pipes with a diameter of 25 - 55 mm using a cutting tip.

The set includes

jacking device with a diameter of 65 mm,

supply and control hose, length 20 m,

oiler with control valves,

set of spanners for changing the equipment,

EkoMAX 5L oil,

KorMAX 1L oil,

LOCTITE 55 sealing thread.

Available options

Cutting sleeve for pulling in Ø 50 mm pipes

Cutting sleeve for pulling in Ø 63 mm pipes

Optical set (sighting scope + pole) 3 m

Optical set (sighting scope + pole) 2 m

EkoMax oil 5 litres

EkoMax oil 20 litres

Compressor – oiler hose, light, 10 m

Compressor – oiler hose, light, 20 m

Cutting tip for manual pulling-in of pipes from Ø 25 mm to Ø 55 mm

Cutting tip for manual pulling-in of pipes from Ø 25 mm to Ø 55 mm without the supply and control hose