Pneumatic mole- 95 mm SET

Application:

Carrying out 95 mm diameter jacking,
Carrying out 125 mm jacking with the use of wideners
Pulling in PE, PVC pipes directly behind the mole with a diameter of 75 mm, 90 mm,
Pulling in PE, PVC pipes using a cutting bit with a diameter of 25 - 55 mm,
Driving in steel pipes up to 219 mm in diameter.
Technical data:

Diameter: 95 mm
Length: 1641 mm
Weight: 56 kg
Air demand: from 1.7 m3/min (2.5 m3/min compressor recommended)
Working pressure: 7 atm
Impact energy 250 J
Operating frequency 7 Hz
The basic set comprises:

jacking machine with a diameter of 95mm,
supply and control hose 20 mb long
oiler with control valve
set of spanners for changing accessories (2 pcs.),
EkoMAX 5L oil,
KorMAX 1L oil,
LOCTITE 55 sealing thread.

The Mole Z095 is suitable for independent jacking Ø 95 mm (with the possibility of manually placing, for example, two Ø 40 mm pipes in a hollow tunnel) and for pulling in plastic pipes Ø 75 mm and Ø 90 mm. Steel pipes up to 219 mm in diameter can also be driven with this machine.

Possible options
Sleeve Ø 75 mm with fittings for inserting PE/PVC pipes
Sleeve Ø 90 mm with fittings for inserting PE/PVC pipes
Pipe insertion set for steel pipes Ø133mm, Ø159mm, Ø219mm
Extraction plate Ø133mm, Ø159mm, Ø219mm
Optical set (telescope + pole) 3 m
Optical set (telescope + pole) 2 m

EkoMax oil 5 litres

EkoMax oil 20 litres

Compressor-oil hose light 10 mb

Hose compressor - light oiler 20 mb

Hand cutting bit for pulling in pipes from Ø 25 mm to Ø 55 mm
Cutting tip for manual pulling in of pipes from Ø 25 mm to Ø 55 mm without
without power and control hose