The earthing and short-circuiting set is designed for short-circuiting and earthing circuits, usually three-phase, in medium-voltage networks up to 36 kV and 50 Hz. It consists of one insulating rod, three line clamps, one earth clamp and short-circuiting cables. The insulating rod allows the line clamps to be attached and tightened safely. The set is type-certified and complies with EN 61230 and PNE 35 9700.
The set is supplied in a carrying case.
Short-circuit current: 10 kA/1 s
Weight: 7,5 kg
The line clamp can be connected to:
Ball-type short-circuit point: Ø 20 mm
Flat busbar up to a width of: 20 mm
Round conductor: Ø 5 – 20 mm
T-point: Ø 15 mm
The earth clamp can be connected to:
Round conductor: Ø 5 – 30 mm
Flat busbar up to a width of: 30 mm
Insulating rod
1 pc
Two-piece version
Length: 1,6 m
Earthing and short-circuiting cable:
1 pc (three-phase)
Short-circuiting cable cross-section: 50 mm²
Earthing cable cross-section: 25 / 35 mm²
Short-circuiting cable length: 2 m
Earthing cable length: 1,5 m